GAP-NG1
Acceleration Test Stand
for Safety Belt Retractors Type GAP-NG1
The Acceleration Test Stand GAP-NG1 makes it possible to
conduct all necessary tests for development and qualitity control
of Safety Belt Retractors and similar safety systems.
Acceleration tests can be performed with different acceleration
profiles in the modes "vehicle-sensitive" and "webbing-sensitive".
In the mode vehicle-sensitive the acceleration of an accident is simulated.
It is measured at which acceleration the SBR blocks safely. The acceleration
profiles, i.e. the starting ramp and the level are defined in standards.
In the test mode "webbing-sensitive" the webbing is pulled out the
stationary SBR with an accelerated movement. It is measured at which acceleration
of the webbing the SBR blocks safely
Economy
The acceleration test stand GAP-NG1 is distinguished
by easy and quick operation. It fulfills the requirements of a
good economy in testing and quality control through a high degree
of automation. After mounting the SBR and entry of the test
parameters the test-stand can perform a test sequence
automatically. During the test no supervision or control is
necessary. The high economy of the system results from the short
mounting time of the specimen and the high repetition rate of
shots.
Technical description
The Acceleration Test Stand GAP-NG1 consists of a test-sled
guided by prismatic rails. The test-sled is driven by an
electric linear motor and a digital control system.
On the test-sled is a motordriven rotor disk, on which
the specimen is mounted. The values of
stroke, belt extraction force and the position of
the rotor disk are measured by electronic sensors. The test-sled,
the linear motor and the test accessories are mounted on a
steel frame.
Price
The price is available on request. A detailed technical description is available
in the download area.
GAP-NG1